Samsung SV-5000W 用户手册
GB
49
GB
48
Technical Specifications
Recording system
Rotary head azimuth recording, luminance signal FM
recording system.
recording system.
Chrominance signal down converted phase shift recording
system (NTSC, PAL, PAL-M).
system (NTSC, PAL, PAL-M).
Chrominance signal down converted direct recording
system (MESECAM).
system (MESECAM).
Chrominance signal 1/4 frequency countdown direct recording
system (SECAM).
system (SECAM).
Color system
NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, SECAM
Tuning system
B/G, D/K, I, M, N, L
RF out
G/I/K/M/L UHF 21-69CH
Tape recording/playback
NTSC, PAL, PAL-M, SECAM, MESECAM
Tape speed
NTSC
33.35mm/sec (standard recording : SP)
PAL-M
11.12mm/sec (three times recording : SLP)
PAL
23.39mm/sec (standard recording : SP)
MESECAM 11.69mm/sec (double speed recording : LP)
SECAM
Tape format
VHS type video tape, S-VHS type video tape (Playback only)
Recording time
Maximum 8 hours (with a T-160 tape/E-240)
Rewinding time
Within 2 minutes (high speed rewinding, T-120 or E-180 tape)
Video input
1.0Vp-p (unbalanced) 75
Ω
Video output
1.0Vp-p (unbalanced) 75
Ω
Video S/N
Above 43dB (standard recording)
Resolution
Above 220 (standard recording NTSC), 240 (standard recording PAL)
Audio input
-8dBm, 47 Kohm unbalanced
Audio output
-8 ± 3 dBm, 1 Kohm unbalanced
Audio S/N
Above 39dB (Mono), 68dB (Hi-Fi)
Audio frequency characteristics
20Hz-20kHz
Rated voltage
100V~240V AC
Rated frequency
50/60Hz
Power consumption
APP. 24 watts on recording; 8 watts off
Operating ambient temperature
41°F-104°F (5°C - 40°C)
Installation conditions
Operation position : Horizontal, Relative humidity : Below 80%
Outside dimensions
Width 430mm x Length 295mm x Height 98mm
Weight
4.3Kg
If you find that your VCR is not operating correctly, or no
indications appear in the display, you can reset it.
indications appear in the display, you can reset it.
1
Press the RESET button on the front panel with a pen or pencil, to
reset the VCR.
Result:
reset the VCR.
Result:
All preset data will be erased and will need to be
reprogrammed.
reprogrammed.
2
If the problem is not solved after you have reset the VCR, refer to
page 50 for a list of simple checks to be performed before
contacting the after-sales service.
page 50 for a list of simple checks to be performed before
contacting the after-sales service.
Locking Your VCR
The playback functions on your VCR can be locked to prevent the
VCR from being used by young children.
You can still watch television programmes via the VCR but you
cannot insert or play a cassette.
VCR from being used by young children.
You can still watch television programmes via the VCR but you
cannot insert or play a cassette.
1
To lock the VCR, hold down the P/STILL ( ) button for
approximately five seconds.
Result:
approximately five seconds.
Result:
The lock indicator (
LOCK
) is displayed.
➢
If a cassette is in the VCR when you lock it, the cassette will
first be ejected.
first be ejected.
2
To unlock the VCR, hold down the P/STILL ( ) button again for
approximately five seconds.
Result:
approximately five seconds.
Result:
The lock indicator (
LOCK
) is no longer displayed.
Resetting Your VCR
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC
P/STILL
STOP
1
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC
P/STILL
STOP
2
ON
EJECT
IN
AUDIO
R
REC
RESET
CHANNEL
1