Samsung SV-5000W 用户手册

/I STANDBY/ON     EJECT

LINE 1 IN

VIDEO                      AUDIO

L

R

REC

RESET

CHANNEL

THROUGH

NTSC

PAL

SECAM

PAL-M

PAL-N

REW                        F.F

P/S                                   STOP

No power.

◆

Check that the power plug is connected to a wall outlet.

◆

Have you pressed the STANDBY/ON button?

You cannot insert a video cassette.

◆

A video cassette can only be inserted with the window 
side up and the safety tab facing you.

◆

Check that the VCR has not been safety-locked (

displayed). If so, hold P/STILL ( ) down for at least five 
seconds to release it.

The television programme was not recorded.

◆

Check the VCR/aerial connections.

◆

Is the VCR tuner properly set?

◆

Check if the safety tab is intact on the cassette.

Timer recording was unsuccessful.

◆

Was the STANDBY/ON button pressed to activate the 
timer?

◆

Re-check the recording start/stop time settings.

◆

If there was a power failure or interruption during timer 
recording, the recording will have been cancelled.

◆

Check that the channel number selected with the 
Timer Programme code is correct.

No playback picture or the picture 

◆

Press the TRACKING buttons (

or

).

is distorted.

◆

Check to see if you are using a pre-recorded tape.

◆

Check the playback system in SET-UP Menu.

You cannot see normal broadcasts.

◆

Check that the source selected using the INPUT button is
the VCR’s tuner.

◆

Check the TV.VCR/aerial connections. 

Noise bar or streaks on playback.

◆

Press the TRACKING buttons (

or

) to minimize this 

effect.

◆

Check the SQPB in the USER SET2 Menu (see page 32).

No operation when the:

◆

Check that tape is not already fully wound.

• REW (

) button is pressed ; or

• F.F (

) button is pressed.

When the P/STILL ( ) button is pressed 

◆

A still picture may have “noise bars”, depending on the 

during playback, the still picture has severe

condition of the tape. Press the TRACKING buttons 

“noise bar” streaks.

(

or

) to minimize this effect.

Incorrect operations or no display.

◆

Use a pencil to press the RESET button and re-initialize 
the VCR. All preset data is lost.

◆ the model and serial number on the rear of your VCR ;
◆ the warranty information ; and
◆ a clear description of the problem.