Toshiba IPedge IP Telephone 用户手册

IPedge
The Basics

28

Each line and Programmable Feature Button has a LED next to it 
which indicates the status of the line or feature associated with the 
button. Line LEDs light red or green and flash at varying rates to 
indicate call status (see 

).

LEDs on the telephone flash at different speeds depending on the 
function performed. Flash rates can be found under 

Extension In-Use
(access outside line)

2 seconds On, 1/8 second Off
— 1/8 second On/Off

steady

1 second on at 10 pulses/sec-
ond —1 second Off

one second On/Off

 (outside line) If using Pooled Line 

Grp, the hold indication is only at the 
station that places the call on hold.

4 pulses/second for 1/8 second 
On/Off

1/2 second On/Off

 – Consultation

(during consultation/transfer to another 
station)

10 pulses/second

steady

 – Exclusive (outside line)

10 pulses/second

steady

 – Recall

(when held call recalls your idle station)

1 second at 2 pulses/second, 
1 second at 10 pulses/second

flashes

 – Exclusive Recall

1 second at 2 pulses/second, 
1 second at 10 pulses/second

steady

Internal Call
(while station ringing)

Your extension button flashes 
10 pulses/second—1 second 
Off

[SDN] red flashing or 
green ringing

Busy Station Transfer
(outside call transferred to your busy 
station from a designated station or AA)

4 pulses/second, 1/8 second 
On/Off

3/4 second on, 1/8 sec-
ond Off

After disconnecting first call...

10 pulses/second

2 pulses/second

10 pulses/second

steady