Ericsson T18d Betriebsanweisung
Not for commercial use – Ericsson Inc.
10
Getting Started
Connecting and Removing Your Battery
1
Place the battery over the back
of the phone. The label on the
battery should face down.
of the phone. The label on the
battery should face down.
2
Insert the top portion of the
battery into the phone. The
tab on the bottom of the bat-
tery should be pointing
toward the bottom of the
phone.
battery into the phone. The
tab on the bottom of the bat-
tery should be pointing
toward the bottom of the
phone.
3
Press down until you hear a
click.
click.
4
Remove the battery by push-
ing in on the tab of the bat-
tery with your thumb.
ing in on the tab of the bat-
tery with your thumb.
5
Lift the battery up and out of
the battery cavity.
the battery cavity.
Charging Your Battery
To charge your battery, complete the appropriate charg-
ing procedure described in this section.
ing procedure described in this section.
Note!
Fully charge the battery before you use your phone.
The label on your phone box identifies the charger and
battery included in the package.
battery included in the package.
Note!
Never
attach the charger to a phone that does not have a
battery installed.
Charge-Only Mode
If your phone is Off, attaching the charger will cause the
phone to activate in charge-only mode. When this mode
is activated the message
phone to activate in charge-only mode. When this mode
is activated the message
appears in
the display. Your phone is now fast (rapid) charging the
battery.
battery.
Note!
You cannot make or receive calls when your phone is in
charge-only mode.
charge-only mode.
Slow (Trickle) Charging a Deeply Discharged Battery
The battery may become deeply discharged (for exam-
ple, when the battery is stored for a long period). As a
ple, when the battery is stored for a long period). As a