Ericsson T18d Betriebsanweisung

Seite von 79
Not for commercial use – Ericsson Inc. 
Getting Started
11
result, the phone may not activate charge-only mode 
when the charger is connected. 
Attach the charger to the phone for several hours to 
slowly (trickle) charge the battery. 
After trickle charging the battery for several hours 
the phone should activate the charge-only mode 
automatically. 
Continue charging the phone until the battery is 
fully charged.
Note!
If the phone is powered On, the battery icon is replaced 
by the 
 icon once the battery is fully charged.
Note!
If the phone is in charge-only mode, Charging Com-
plete
 appears in the display when the battery is fully 
charged.
Selecting Your Charger
Your phone is packaged with one of the following bat-
tery chargers:
• Rapid charger
• Travel charger
• Desktop charger
Rapid Charger
The rapid charger supplies power 
to charge your battery while the 
battery is attached to your phone. 
If your phone is On, it can receive 
calls while using the rapid charger.
To charge your battery using the 
rapid charger:
Plug the charger into a standard 
wall electrical outlet.
Hold the phone with the dis-
play and keypad facing up.
Hold the small plug on the 
charger cord so the lightning 
bolt symbol is up.
Align the small plug on the 
charger cord with the connec-
tor on the bottom of your phone. The connector on 
the phone is above the lightning bolt symbol.
Note!
Do not twist while inserting or removing the small 
plug on the charger cord!
Press the plug into the connector until the plug 
“snaps” into place.
Note!
To disconnect the charger, lift the plug connected to the 
phone upwards and pull it out.