Honeywell MRP-2001E Benutzerhandbuch

Programming

MRP-2001 & MRP-2001E   PN 53040:A  4/16/2007

81

To access Maintenance Programming mode, press the Enter key.  The LCD will display the 
following: 

To enter the Maintenance Programming mode, press 2.  The display will read as follows: 

When the Maintenance level password (default 11111) is entered, the following screen will appear: 

Note that in the preceding screens, an arrow appears to inform the programmer that additional 
options can be viewed by pressing the keypad down arrow key, as shown in the following screen.

1=READ STATUS
2=PROGRAMMING

PROGRAMMING
ENTER PASSWORD

    PROGRAMMING
1=INPUT ZONES
2=HISTORY
3=WALKTEST

    PROGRAMMING
1=TIME-DATE