Epson S1D13708 Benutzerhandbuch
Page 8
Epson Research and Development
Vancouver Design Center
S1D13708
13708CFG Configuration Program
X39A-B-001-01
Issue Date: 01/11/16
Preferences Tab
The Preference tab contains settings pertaining to the initial display state. During runtime
these settings may be changed.
these settings may be changed.
Panel SwivelView
The S1D13708 SwivelView feature is capable of
rotating the image displayed 90°, 180°, or 270° in a
counter-clockwise direction. This setting determines
the initial orientation of the panel.
counter-clockwise direction. This setting determines
the initial orientation of the panel.
Panel Invert
The S1D13708 can invert the display data going to the
LCD panel. The display data is inverted after the Look-
Up Table, which means colors are truly inverted.
Up Table, which means colors are truly inverted.
S/W Invert Enable
The Video Invert feature can be controlled by software
using REG[70h] bit 4. When this box is checked, the
Software Video Invert bit is set to one and video data is
inverted. If the box is unchecked, the bit is set to zero
and video data remains normal.
using REG[70h] bit 4. When this box is checked, the
Software Video Invert bit is set to one and video data is
inverted. If the box is unchecked, the bit is set to zero
and video data remains normal.
H/W Invert Enable
The Video Invert feature can be controlled by hardware
if the GPIO0 is available. Hardware control is not
possible if an HR-TFT or D-TFD panel is used as both
panels use GPIO0 as an LCD control signal.
possible if an HR-TFT or D-TFD panel is used as both
panels use GPIO0 as an LCD control signal.
Color Depth
Sets the initial color depth on the LCD panel.
Panel SwivelView
Panel Color Depth
S/W Invert Enable
H/W Invert Enable