Panasonic NV GS 330 Benutzerhandbuch
Edit mode
46
VQT1L48
≥If you record (dub) images onto another video
device and then play them back on a wide-
screen TV, the images may be stretched
vertically. In this case, refer to the operating
instructions for the device that you are recording
(dubbing) to or read the operating instructions
for the TV and set to 16:9 (full).
screen TV, the images may be stretched
vertically. In this case, refer to the operating
instructions for the device that you are recording
(dubbing) to or read the operating instructions
for the TV and set to 16:9 (full).
≥For more information, refer to the operating
instructions for your TV set and recorder.
≥When you do not need functional indications or
date and time indication, respectively set
[SETUP] >> [DISPLAY] >> [OFF] or set [BASIC]
>> [DATE/TIME] >> [OFF] in the Tape Playback
Mode.
(When you connect the movie camera and a
recorder with the DV cable, these indications
may not appear.)
[SETUP] >> [DISPLAY] >> [OFF] or set [BASIC]
>> [DATE/TIME] >> [OFF] in the Tape Playback
Mode.
(When you connect the movie camera and a
recorder with the DV cable, these indications
may not appear.)
ª
When neither image nor sound from
the movie camera is output to the TV
set
the movie camera is output to the TV
set
≥Check that the plugs are inserted as far as they
go.
≥Check the [12bit AUDIO] settings. (
-48-
)
≥Check the connected terminal.
Using the DV Cable for Recording
(Digital Dubbing)
(Digital Dubbing)
By connecting other digital video equipment with
DV terminal and the movie camera by using the
DV cable VW-CD1E (optional)
DV terminal and the movie camera by using the
DV cable VW-CD1E (optional)
1, high-image-
quality dubbing can be done in digital format.
≥Set to Tape Playback Mode.
≥Set to Tape Playback Mode.
(Player/recorder)
1
Connect the movie camera and digital video
equipment with the DV cable.
equipment with the DV cable.
2
Set [ADVANCED] >> [REC STDBY] >> [YES].
(Recorder)
(Recorder)
≥You do not have to follow this step when the
remote control is used in the digital dubbing.
3
Start playback. (Player)
4
Start recording. (Recorder)
When operating with the main unit:
Move the joystick up to select [
When operating with the main unit:
Move the joystick up to select [
¥
/
;
] icon.
When operating with the remote control:
While pressing the [
While pressing the [
¥
REC] button on the
remote control, press the [PLAY
1] button.
5
Move the joystick up to select the [
¥
/
;
]
icon again or press the [
;
] button on the
remote control to stop recording.
(Recorder)
(Recorder)
6
Stop playback. (Player)
1
VQT1L48_ENG.book 46 ページ ２００７年１２月１１日 火曜日 午後４時５５分