Panasonic NV GS 330 Benutzerhandbuch

Seite von 80
Edit mode
48
VQT1L48
ª
Before recording with audio dubbing
Set to Tape Recording Mode.
≥When you want to preserve the original sound 
taken during recording, set [ADVANCED] >> 
[AUDIO REC] >> [12bit] to take pictures. (When 
set [16bit], the sounds taken during recording 
are erased after recording with audio dubbing.) 
≥Set [BASIC] >> [REC SPEED] >> [SP] to take 
pictures.
ª
To play back the sound recorded with 
audio dubbing
You can switch between the sound recorded with 
audio dubbing and the original sound.
Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX].
[ST1]: It only plays back the original sound.
[ST2]: It only plays back the sound added by 
audio dubbing.
[MIX]:
It simultaneously plays back the original 
sound and the sound added with audio 
dubbing.
≥During audio dubbing, it is automatically set to 
[ST2].
Printing pictures by directly 
connecting to the printer (PictBridge)
To print pictures by directly connecting the movie 
camera to the printer, use a printer compatible 
with PictBridge. (Read the operating instructions 
for the printer.) 
Insert a card and set to Card Playback Mode.
1
Connect the movie camera and the printer 
with the supplied USB
 cable.
1 USB cable
≥The [PictBridge] indication appears on the 
screen of the movie camera.
(When the printer is being recognised, the 
[PictBridge] indication blinks.)
≥When no card is inserted in the movie camera, 
the [PictBridge] indication does not appear. 
(You cannot print any pictures.) 
≥When the movie camera and the printer are not 
connected properly, the [PictBridge] indication 
keeps blinking. (It will blink for over 
approx.1 minute.) Connect the cable or check 
the printer.
≥When images are displayed in multi-screen, 
they cannot be printed.
≥Do not use any other USB connection cables 
except the supplied one. (Operation is not 
guaranteed with any other USB connection 
cables.)
2
Select [SINGLE PRINT] or [DPOF PRINT].
≥If there is no file with a DPOF setting, you 
cannot select [DPOF PRINT].
≥When you select [DPOF PRINT] for printing, 
set the number of prints in DPOF setting.
≥When [DPOF PRINT] is selected, print after  
you determine the paper size. (Step 6)
≥When [DPOF PRINT] is selected,date 
printing is unavailable.
1
PictBridge
VQT1L48_ENG.book  48 ページ  2007年12月11日 火曜日 午後4時55分