Harman Stove Company P35I Benutzerhandbuch

18

Pellets or Corn/Pellet Mixture Only                                           3-90-775                                                                           Save These Instructions

Outside Air Kit #1-00-774280 (sold separately) must 

be used for attaching outside air to the insert. This kit 

contains a 3" stub and gasket to mount to the frame, 

and the outside air adapter which secures to the insert 

body. The outside air intake connection will seal to the 

mounting frame, just like the exhaust does. Follow the 

instructions included in the kit to ensure proper instal-

lation.

1.  Make a determination of where you want to draw 

the outside air from. Here are a few options.

 

a. Punch a hole through the rear of the 

                fireplace and exterior wall. Rigid pipe or flex

                pipe could be used.

 

b. Use the chimney or chase as a conduit for   

                outside air. The exhaust liner must be run    

                the full length of the flue. When creating      

                your steel plate to seal the damper area,

 

    Make another 3 inch hole for the outside air

 

    pipe. Install a short run of pipe from the        

                mounting frame through the sealing plate.  

 

    Then install the chimney top extension kit,

 

    item #1-00-674104 at the top of the chimney.

 

    This is slotted to allow fresh air into the      

                chimney or chase.

2.   Secure the outside air supply pipe to the stub on   

      the mounting frame using a minimum of two fas-   

      teners.

3.   If running the supply pipe direct, install the outside

      air cover weldment #1-10-09542 to keep birds or

      rodents from entering the supply pipe. 

4.   Keep the intake a minimum of 4 feet (1.2 m) below    

      the exhaust termination.

Never draw outside combustion air from:

•  Wall, floor or ceiling cavity.

•  Enclosed space such as an attic or garage

--
--