Dimplex DF2622BLK Benutzerhandbuch

11

Controls (Figure 5)

The manual controls for the 

fireplace are behind the access 

panel located at the bottom of the 

fireplace.
A.  Three Position On/Off 

Switch
The switch has two (2) on 

positions marked with “ 

I ” and 

“ 

II ”.  The “ I ”  position is for 

manual operation.  In this position 

the built-in remote control is 

bypassed.  The “ 

II ” position is 

for operating the unit with the 

provided remote control.  When in 

“ 

II ” position the unit is operated 

with the ON and OFF buttons 

of the remote control.  When 

the switch is in the center “ 

O ” 

position the unit is off.

B.   Flame Action Control 
Turn the Flame Action Control 

knob to adjust the flame speed to 

the desired level. 

C.   Light Dimmer Control 
Turn the Light Dimmer Control 

knob to increase or decrease the 

brightness of the interior of the 

fireplace. 
D.   Heater On/Off Switch  
The Heater on/off switch 

supplies power to the heating 

unit when the Three Position on/

off switch (A) is on (

“ 

I ” or “ II ” 

positions)

.

E. Heater Thermostat Control 
To adjust the temperature to 

your individual requirements, 

turn the thermostat control 

clockwise all the way to turn 

on the heater. When the room 

reaches the desired temperature, 

turn the thermostat knob counter 

clockwise until you hear a click. 

Leave in this position to maintain 

the room temperature at its 

setting.  For additional heat, turn 

clockwise until you hear the click 

again and the heater will turn on. 

B

C

A

E

D