Dimplex DF2622BLK Benutzerhandbuch

12  

www.dimplex.com

To turn the heater off, rotate the 

knob fully counter clockwise.

This unit is equipped with a 

thermostat which controls the 

temperature of the room by 

turning the heater on and off. The 

heater is protected with a safety 

device to prevent overheating. 

should the heater overheat, an 

automatic cut out will turn the 

heater off and it will not come 

back on without being reset. It 

can be reset by switching the 

Three Position on/off switch to 

off and waiting five (5) minutes 

before switching the unit back on.

 CAUTION:  If you need to 

continuously reset the heater, 

unplug the unit and call 

Technical support at 1-888-

346-7539.  Please have your 

model and serial number 

ready when calling.

Remote Control (Figure 6)

The fireplace is supplied with an 

integrated on/off remote control.

To operate, push the on button 

to turn the fireplace on, push the 

oFF button to turn the fireplace 

off.
Battery Replacement (Figure 6)
To replace the battery:
•  slide battery cover open on 

the hand held transmitter.  

•  Correctly install one (1) 12 Volt 

(A23) battery in the battery 

holder.  

•  Close the battery cover.

Follow these steps for remote 

control initialization and if 

required, re-initialization:

Disconnect power to 

1. 

fireplace.
set the Three Position on/off 

2. 

switch to the remote position 

(Figure 5A).
Wait a minimum of five (5) 

3. 

seconds and then re-acquire 

power to fireplace.
Within

 10 seconds of re-

acquiring power, press the