Dimplex DF2622BLK Benutzerhandbuch

Seite von 20
 
13
  Operation
on button located on the 
remote control transmitter.
!
 NOTE: You will have only 10 
seconds to perform this last 
step.  Failure to do so will 
result in these steps needing 
to be followed again.
This will synchronize the remote 
control transmitter and receiver.
 
 
Battery 
Cover
Figure 6
ON
Button
OFF
Button
 
 
  Maintenance
WARNINg:  Disconnect power 
before attempting any 
maintenance or cleaning to 
reduce the risk of fire, electric 
shock or damage to persons.
Light Bulb Replacement
Allow at least five (5) minutes 
for the light bulbs to cool before 
touching them to avoid accidental 
burning of the skin.  The light 
bulbs need to be replaced when 
you notice a dark section of 
the flame or when the clarity 
and detail of the log ember bed 
exterior reduces.  There are 
three (3) bulbs under the Log Set 
Assembly, which generate the 
flames and embers, and two (2) 
bulbs above that illuminate the log 
exterior.
Lower Light Bulb Requirements
Quantity of three (3) clear chan-
delier or candelabra bulbs with an 
E-12 (small) socket base, 60 Watt 
rating.  Example: GE 60BC or 
Philips 60CTC.
Do not exceed 60 Watts per 
bulb.
Helpful Hints
It is a good idea to replace all 
light bulbs at one time if they are 
close to the end of their rated life.  
Group replacement will reduce