B.C. Rich Zombie Exotic Classic Benutzerhandbuch

Step 1:

To replace a string, push down on the 

back of the saddle of one of the strings.

Step 2:

Then, pull back on the sliding latch by 

placing the first finger of your free 

hand on the black knob protruding 

out the back of the saddle then placing 

your thumb on the fin sticking up just 

behind the fine tuner screw and pull 

the latch back with a pinching action 

between the thumb and first finger.

Step 3:

Once you have pulled back on the 

sliding latch, release the saddle and 

allow it to rotate forward.

Please note: SpeedLoader strings are offered in two scale lengths: 25.5inches 

and 24.75 inches. If you're not sure what scale length your guitar is, consult 

the guitar manufacturer or the store where you purchased the guitar.

Make sure you have purchased the correct scale length strings for your guitar. 

The string scale length appears in the lower left corner of the string package.

To purchase strings go to: www.floydrose.com or ask for them at your local 

dealer.

Step 3:

If this part is missing stop right here 

and get one installed by a qualified 

guitar repairman. You can get this part 

from www.floydrose.com.

Depending on the guitar you purchased, 

the tremolo stop may or may not be 

engaged with the spring block.

We will assume it is not engaged and 

show you how to engage it.

Take the 3mm Allen wrench and turn 

the setscrew until it touches the spring 

block.

Step 4:

Now, tighten the springs with the spring 

claw screws so the spring block is 

pulled tightly against the setscrew.

Step 5:

Another way to pull the spring block 

against the tremolo stop set screw is 

to add another spring to the spring 

block and claw. Using this method is 

preferred because it will be easier to 

re-float the tremolo after setting up 

the bridge.

6

11