B.C. Rich Zombie Exotic Classic Benutzerhandbuch

Step 4:

Now remove the bullet from the 

saddle.

Step 5:

If you are replacing a broken string, 

when you unlatch the pivoting saddle 

there will be no tension on the string 

to pull the pivoting saddle forward, so 

you'll have to pivot the saddle forward 

with your finger.

You can now remove the bullet on the 

other end of the string from the nut 

by simply sliding it out the back of the 

nut.

Step 6:

If you try to release a saddle and pull back on the sliding latch and it won't 

budge, release everything and start over making certain that you don't turn 

the sliding latch sideways. If the sliding latch turns on its shaft, the safety catch 

portion of the sliding latch will not line up properly with the safety catch 

portion of the pivoting saddle and will cause binding.

The safety catch is there to prevent the string from accidentally releasing while 

playing or changing strings.

Step 1:

To level the base plate, first take the 

spring cover plate off the back of the 

guitar.

Step 2:

Inside the spring cavity you should find 

a tremolo stop.

The proper setup of the SpeedLoader Tremolo Bridge looks exactly like a 

properly setup Original Floyd Rose Tremolo Bridge. By the way, the SpeedLoader 

Tremolo will retrofit an Original Floyd quite easily.

The first thing you'll want to do is check to see if the top surface of the base 

plate of the bridge is sitting parallel to the top surface of the guitar.

If the base plate appears to be tilted forward away from the top surface of the 

guitar or tilted back closer to the top of the guitar, then an adjustment should 

be made.

This is what the safety catch looks like up close. (see above)

10

7