Ricoh SP C250SF Benutzerhandbuch
Error and Status Messages on the Screen
Messages are listed in alphabetical order in the table below.
"X" indicates the parts of the messages that appear differently depending on the situation, such as the
paper size, paper type, and tray name.
"X" indicates the parts of the messages that appear differently depending on the situation, such as the
paper size, paper type, and tray name.
• If the alert indicator lights up continuously or flashes, switch to copier mode and check the
displayed message.
Message
Causes
Solutions
2XXX14
The machine was not able to
print the received fax, or the
machine's memory reached its
capacity while receiving a fax
because the document was too
large.
print the received fax, or the
machine's memory reached its
capacity while receiving a fax
because the document was too
large.
• The paper tray was empty. Load
• The tray selected in [Select Paper
Tray] under [Fax Features] did not
contain A4, Letter, or Legal size
paper. Load valid size paper in the
tray, and then configure the paper
size settings under [Tray Paper
Settings] accordingly.
contain A4, Letter, or Legal size
paper. Load valid size paper in the
tray, and then configure the paper
size settings under [Tray Paper
Settings] accordingly.
• A cover or tray was open. Close the
cover or tray.
• There was a paper jam. Remove the
• A print cartridge was empty. Replace
• The received fax was too large. Ask
the sender to resend the document in
parts as several smaller faxes, or to
send at a lower resolution.
parts as several smaller faxes, or to
send at a lower resolution.
ADF Orig. Misfeed
Open ADF Cover
and
Remove paper.
Open ADF Cover
and
Remove paper.
An original has been jammed
inside the ADF.
inside the ADF.
• Remove jammed originals, and then
• Check the originals are suitable for
10. Troubleshooting
334