Ricoh SP C250SF Benutzerhandbuch
Message
Causes
Solutions
Cannot Copy This
Setting
Comb.: 2 on 1 / 4
on 1
Ppr.Size: B6 / 7
1/4x10 1/2
Setting
Comb.: 2 on 1 / 4
on 1
Ppr.Size: B6 / 7
1/4x10 1/2
2-in-1 or 4-in-1 copy could not
be performed because the tray
does not contain the valid size
paper, which are A4, Letter, or
Legal size.
be performed because the tray
does not contain the valid size
paper, which are A4, Letter, or
Legal size.
• Using the machine's control panel,
specify [Select Paper] to print copies
using the A4, Letter, or Legal size
paper. See page 193 "Copier
Features Settings".
using the A4, Letter, or Legal size
paper. See page 193 "Copier
Features Settings".
• Select the A4, Letter, or Legal size
paper for the tray selected for printing
copies. See page 215 "Tray Paper
Settings".
copies. See page 215 "Tray Paper
Settings".
Cannot copy.
Set original to ADF.
Set original to ADF.
2-in-1, 4-in-1, or 2-sided copy
could not be performed
because the originals were not
placed in the ADF.
could not be performed
because the originals were not
placed in the ADF.
• Use the ADF, even when copying a
single sheet.
• If you need to use the exposure glass,
select [Off] or [Manual 2 Sided Scan
Mode] in [Duplex/Combine] under
copy settings, and then try again. See
page 193 "Copier Features Settings".
Mode] in [Duplex/Combine] under
copy settings, and then try again. See
page 193 "Copier Features Settings".
Check Paper Size
The paper size set for the
document differs from the size of
the paper in the indicated tray.
document differs from the size of
the paper in the indicated tray.
Press [FormFeed] to begin printing, or
press [JobReset] to cancel the job.
press [JobReset] to cancel the job.
Check Paper Type
The paper type set for the
document differs from the type
of the paper in the indicated
tray.
document differs from the type
of the paper in the indicated
tray.
Press [FormFeed] to begin printing, or
press [JobReset] to cancel the job.
press [JobReset] to cancel the job.
Connection Failed
The line could not be connected
correctly.
correctly.
• Check if the telephone line cord is
properly connected to the machine.
• Disconnect the telephone line from
the machine, and connect the cord to
a telephone. Check if you can make
calls using the telephone. If you
cannot make calls this way, contact
your telephone company.
a telephone. Check if you can make
calls using the telephone. If you
cannot make calls this way, contact
your telephone company.
Cover open
A cover is open.
Close the cover completely.
Density Sensor
Require Cleaning
Require Cleaning
The machine failed to adjust
color registration.
color registration.
Clean the toner density sensor. See
page 286 "Cleaning the Toner Density
Sensor".
page 286 "Cleaning the Toner Density
Sensor".
10. Troubleshooting
336