Enterasys Networks RBTSA-AB Benutzerhandbuch

The Enterasys Networks11a/b/g Wireless Ethernet Adapter Configuration 
Management System resides on the Ethernet Adapter and lets you 
configure the Ethernet Adapter through your Web browser.

To use the Configuration Management System, the computer you are 
using to connect to the Ethernet Adapter must be located on the same 
subnet as the Ethernet Adapter.

There are two ways to access the Configuration Management System:

■

Enter the IP address of the Ethernet Adapter in your computer’s web 
browser.

■

Start the Enterasys Networks Wireless Infrastructure Device Manager, 
locate the  Ethernet Adapter, and then click Configure.

When you first open the Configuration Management System, you are 
prompted for a user name and password:

■

User name — admin

■

Password — blank (press enter)

The Configuration Management System displays the Connection Status 
page, as detailed in Table 8.

Table 8   Connection Status Page 

Connection

The MAC address of the associated 
access point.

N/A

Network Type

The type of network for which the 
Ethernet Adapter is configured: 
Wireless Client (Infrastructure) or 
Ad-hoc (Peer-to-Peer).

Wireless Client 
(Infrastructure)

SSID

The Service Set ID.

Varies

Radio Mode

The way in which the Ethernet 
Adapter selects a radio band.

Auto-Select