Enterasys Networks RBTSA-AB Benutzerhandbuch
30
C
HAPTER
3: C
ONFIGURING
THE
E
THERNET
A
DAPTER
Clearing and
Applying System
Configuration
Settings
The pages in the Configuration Management System have two buttons:
Clear and Apply.
Clear and Apply.
■
Clear returns the settings to the values they were when you last
clicked Apply.
clicked Apply.
■
Apply stores the settings permanently in the nonvolatile flash memory.
After you click Apply, the new settings take effect and you can see the
changes on the System Summary page.
After you click Apply, the new settings take effect and you can see the
changes on the System Summary page.
CAUTION: Your changes are lost if you forget to click Apply before
moving to a new configuration page.
moving to a new configuration page.
VORSICHT: Wenn Sie nicht auf "Apply" (Übernehmen) klicken, bevor Sie
zu einer neuen Konfigurationsseite wechseln, gehen Ihre Änderungen
verloren.
zu einer neuen Konfigurationsseite wechseln, gehen Ihre Änderungen
verloren.
Current Channel
The channel over which the
Ethernet Adapter is
communicating with clients.
Ethernet Adapter is
communicating with clients.
Varies
Security
The type of security for which the
Ethernet Adapter is configured.
Ethernet Adapter is configured.
Open System
(no security)
(no security)
Rx Data Rate (Mbps) The most recent data reception
rate.
N/A
Tx Data Rate (Mbps) The most recent data transmission
rate.
N/A
Link Quality
The normalized transmitted data
rate (that is, the current data rate
over the maximum data rate).
rate (that is, the current data rate
over the maximum data rate).
Note: Link Quality is shown in
Infrastructure mode only.
Infrastructure mode only.
N/A
Received Signal
Strength
Strength
The strength of the radio signal
that the Ethernet Adapter detects.
that the Ethernet Adapter detects.
Note: Received Signal Strength is
shown in Infrastructure mode only.
shown in Infrastructure mode only.
N/A
Activity (Packets Rx)
The number of packets the
Ethernet Adapter has received.
Ethernet Adapter has received.
N/A
Activity (Packets Tx)
The number of packets the
Ethernet Adapter has transmitted.
Ethernet Adapter has transmitted.
N/A
IP Address
The IP address of the Ethernet
Adapter.
Adapter.
Varies
Table 8 Connection Status Page (continued)