Enterasys Networks RBTSA-AB Benutzerhandbuch

Under System Configuration, click System Properties. The System Properties 
page displays the properties of the selected Ethernet Adapter. You can 
change properties by entering a value in a field (see Table 9). When you are 
finished, click Apply. Table 9 describes the properties.

Table 9   System Properties Page 

Device Name

This name appears in the System 
Summary window. You can change the 
default name to one of your choice.

RoamAbout Ethernet 
Adapter - RBTSA

Device Location

If you use the default device name, 
entering the location is optional.

None

Client Mode

This setting allows the Ethernet Adapter 
to support single or multiple Ethernet 
clients attached to the Ethernet Adapter. 

Support Single Wired Ethernet Client is 
used only when the Ethernet Adapter is 
used for replacement of a Enterasys 
Networks Ethernet Client Ethernet 
Adapter. Select a MAC option:

■

Capture: Each time the Ethernet 
Adapter is powered on, it captures its 
MAC address from the first packet it 
receives on the Ethernet port. The 
Ethernet Adapter detects and uses 
the same MAC address as the device 
plugged into the Ethernet port.

The Ethernet Adapter uses the 
previously captured MAC address 
upon power-on until the first packet 
is received on the Ethernet port.

■

Dynamic: The Ethernet Adapter 
changes its MAC address each time 
the device plugged into the Ethernet 
port changes.

The Ethernet Adapter detects the 
MAC address of the device plugged 
into the Ethernet port and uses that 
as its own. The Ethernet Adapter uses 
the built-in MAC address upon 
power-on until a packet is received 
on the Ethernet port.

■

Built-in: The Ethernet Adapter uses 
the manufacturing radio MAC 
address as default.

Support multiple wired 
Ethernet clients