Juniper Networks M10i Benutzerhandbuch

Figure 46: Installing a Routing Engine

The slot labeled 

PC CARD

 on the Routing Engine faceplate accepts a Type I PC Card,

as defined in the PC Card Standard published by the Personal Computer Memory
Card International Association (PCMCIA). The router is shipped with a PC Card that
contains JUNOS Internet software. The PC card can be used to copy JUNOS software
from the PC Card onto the Routing Engine. You can also copy JUNOS software from
the Routing Engine onto a PC Card, for example, to create a backup copy of upgrade
software that you have obtained from Juniper Networks. Instructions for copying
software to a PC Card are available at the Juniper Networks Support Web site
(

http://www.juniper.net/support/

); after logging in, navigate to the Customer Support

Center, then to the download page for JUNOS Internet software.

NOTE: The appearance and position of electronic components or the PC card slot
on your Routing Engine might differ from the figures in this section. These differences
do not affect Routing Engine installation and removal or functionality.

NOTE: The software on a PCMCIA card is loaded only onto the Routing Engine into
which the PCMCIA card is inserted. It is not automatically copied to the other Routing
Engine.

To remove and insert a PC card, perform the following procedures:

■

■

Removing the PC Card

The PC card is inserted in the slot labeled 

PC CARD

 in the Routing Engine faceplate.

1.

Press the eject button located next to the PC card slot in the Routing Engine
faceplate. Note that the PC card slot might be located in a different position from
that shown in 

.

124

■

Replacing Routing Engine Components

M10i Internet Router Hardware Guide