Juniper Networks M10i Benutzerhandbuch
2.
When the PC card pops partially out of the slot, grasp the card and pull it straight
out of the slot.
out of the slot.
Figure 47: Removing the PC Card
Inserting the PC Card
To insert the PC card, follow this procedure (see
):
1.
Orient the PC card with the Juniper Networks logo facing in the direction specified
on the Routing Engine faceplate. Insert the card into the slot.
on the Routing Engine faceplate. Insert the card into the slot.
2.
Press the card firmly all the way into the slot. Note that the PC card slot might
be located in a different position from that shown in
be located in a different position from that shown in
.
Replacing Routing Engine Components
■
125
Chapter 13: Replacing Hardware Components