Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Siemens
  4. D410
  5. Benutzerhandbuch

Siemens D410 Benutzerhandbuch

Download
Seite von 150
Commissioning (software) 
 
4.8 Creating a DMC20 
 
D410 
108
 
Commissioning Manual, 08/2008 Edition 
4.8.2 
Creating a DRIVE-CLiQ hub 
The hub is not wired when you insert the DMC20 and is represented in the topology tree in 
the component storage. The hub has to be wired manually. Proceed as follows:  
1.  Right-click the "Topology" entry in the Project Navigator. 
2.  Select the "Insert new object" > "DRIVE-CLiQ Hub" command from the shortcut menu 
and confirm with "OK". 
3.  Double-click "Topology" to open the topology tree. 
The hub is saved to the component storage of the topology tree.  
4.  Drag-and-drop the hub to the required DRIVE-CLiQ interface. 
The components connected to the hub are displayed in the topology tree. 
The hub you inserted is displayed as icon at the "Topology" entry in the Project Navigator. All 
components connected to a hub are also displayed in the course of automatic configuration.