Infocus IN3916 Benutzerhandbuch

You can hold the wand the way you would hold a normal pencil or pen, or you can 
hold it like a remote control - use in whichever position is most comfortable. 
NOTE: If the wand is up close to the screen, you can press its tip against the 
projection surface to click and drag. Not recommended for use with fabric screens.

The projector can work with more than one wand, but you can only use one wand at 
a time. When you want to switch to a different wand: 

Point the current wand away from the projected image for at least 3 seconds.

Press the tip, left or right button on the new wand to turn it on, and then start 

using the new wand.

NOTE: Settings in the projector's LiteBoard Wand menu (see below) apply to all 
wands used with that projector.

USB connector

Link light

Battery light

Reset button

Right mouse button

Left mouse button

Scroll Wheel button

Sensor

Tip

Undo button

The wand's three top buttons are equivalent to the left, right, and scroll wheel 
buttons on a mouse. The wand's tip is also a button, and is equivalent to the left 
mouse button. 
NOTE: By default, the Scroll Wheel button changes wand motion between Auto, 
Normal and Draw. Auto switches between Draw, Normal and Stable mode 
depending on the image size and distance. Normal makes clicking easier, but Draw 
allows smoother motion. You can change the Scroll Wheel button to perform other 
functions, including a standard middle button mouse click (see LiteBoard Wand 
Menu below).

The amber battery light shows the status of the wand's built-in battery (see below 
for battery information). The battery light will turn on while the wand is charging, 
and it will blink if the battery is low (2-4 hours of wand use left).