Summit HL-630 OPC Benutzerhandbuch

 

13

 

set to YES on the cartridge chip. Even after the 
cartridge is refilled, the printer display will still 
show “Toner Low” for the supplies status section of 
the menu. Since these machines do not have a 
display, only the supplies status page  will show 
“Non HP Toner cartridge”. If the chip is removed, 
the toner low sensors will be disabled, and will not 
work again until a new HP cartridge is installed..  
Replacement chips are available 
 
 
 

The HP-4100 was the first HP black toner cartridge 
to use an ARD. Unlike other chips, these only 
monitor usage not page counts. Each chip also has 
its own serial number which in effect gives the 
cartridge a serial number. After the OEM toner has 
been used up, the “toner low reached” code will be 
set to YES on the cartridge chip. Even after the 
cartridge is refilled, the printer display will still 
show “Toner Low” for the supplies status section of 
the menu. The main display will then show “Non HP 
Toner cartridge”. If the chip is removed, the toner 
low sensors will be disabled, and will not work again 
until a new HP cartridge is installed. Further testing 
on this is being conducted. Another possible use of 
this chip is when warranty repairs are needed.  The 
machine will have a complete history of all the HP 
and non-HP cartridges used! Replacement chips are 
available. 
 
 
 
 
 
 
 
 
 
 
 

The HP-4200 uses the second generation black toner 
cartridge ARD’s.  These chips (ARD’s) only 
monitor toner  usage not page counts. Each chip also 
has its own serial number which in effect gives the 
cartridge a serial number. After the OEM toner has 
been used up, the “toner low reached” code will be 
set to YES on the cartridge chip. Even after the 
cartridge is refilled, the printer display will still 
show “Toner Low” for the supplies status section of 
the menu. Since these machines do not have a 
display, only the supplies status page  will show 
“Non HP Toner cartridge”. If the chip is removed, 
the toner low sensors will be disabled, and will not 
work again until a new HP cartridge is installed.  
Replacement chips are available. 
 

The HP-4250/4350 uses the second generation black 
toner cartridge ARD’s.  These chips (ARD’s) only 
monitor toner  usage not page counts. Each chip also 
has its own serial number which in effect gives the 
cartridge a serial number. After the OEM toner has 
been used up, the “toner low reached” code will be 
set to YES on the cartridge chip. Even after the 
cartridge is refilled, the printer display will still 
show “Toner Low” for the supplies status section of