Primera Technology LX900 Benutzerhandbuch

. (Sensor off) If you have continuous stock with no

die-cut, reflective mark or holes, set the 

sensor type

 to

Continuous. This will turn off the stock sensor.  It this mode

there is no way to set the print starting position.  The printer

will simply start printing the first label and print each subse-

quent label immediately after that previous one. To produce a

gap between prints simply add the desired amount of white

space to the end of the label being printed.

E: SET THE 

OUTPUT MODE

Toggle the Output Mode to set whether or not the last label

printed will be presented or left inside the printer. To adjust 

the output mode, open the PTStatus program.  PTStatus auto-

matically installs with your printer driver and can be accessed

through the printer driver or as program that is accessible in

the same manner as all other programs.  
1. Connect the printer via USB and turn on the power.  The

Output Mode Setting is stored on printer main board so

you will not be able to access it unless the printer is turned

on and properly communicating with the computer.

2. Go to Start - Programs - Primera Technology - PTStatus

.

3. Click on the Alignment Tab (3rd tab from top).
4. Click on the Output Mode button.
5. Select the Output Mode by clicking on the corresponding

graphic.

LX900.qxd  1/14/2010  12:41 PM  Page 14