Zebra Technologies 105SL Benutzerhandbuch
76
105SL User Guide
6/4/2004 11342L Rev. 8
Routine Maintenance
Lubrication
Lubrication
Fuse Replacement
The printer uses a metric-style fuse (5 × 20 mm IEC) rated at F5A, 250V. The end caps of the
fuse must bear the certification mark of a known international safety organization (see
fuse must bear the certification mark of a known international safety organization (see
may need to be replaced by a qualified service technician. Refer to the Maintenance Manual
(part number 32056L) for details.
(part number 32056L) for details.
Figure 44 • Fuse Replacement
Caution • No lubricating agents other than Zebra-supplied, silicon-only lubricants should
be used on the spindle felt clutches of this printer. Other commercially available lubricants
damage the finish and mechanical parts.
be used on the spindle felt clutches of this printer. Other commercially available lubricants
damage the finish and mechanical parts.
Note •
Models with a user-replaceable fuse have a warning label next to the fuse for easy
identification.