Hoshizaki DT-400BAH-OS Benutzerhandbuch
8
E. Electrical Connection
See Fig. 2
WARNING
The GREEN ground wire in the factory-installed power cord is connected
to a screw on the bracket where the cord enters the machine. If it becomes
necessary to remove or replace the power cord, be sure to connect the power
cord’s ground wire to this screw upon reattachment.
to a screw on the bracket where the cord enters the machine. If it becomes
necessary to remove or replace the power cord, be sure to connect the power
cord’s ground wire to this screw upon reattachment.
• Electrical connections must be installed in accordance with applicable national,
state, and local regulations.
• The icemaker requires an independent power supply. See the nameplate for
proper voltage and breaker/fuse size.
• Usually an electrical permit and services of a licensed electrician are required.
• The maximum allowable voltage variation is ±10 percent of the nameplate
• The maximum allowable voltage variation is ±10 percent of the nameplate
rating.
Fig. 2
Power Cord