Amana ARTC7511 Benutzerhandbuch

21

To avoid risk of personal injury, do not touch oven vents
or areas around vents during self-cleaning. These areas
can become hot enough to cause burns.

To avoid risk of smoke damage or fire, clean excess
spills from oven interior.

To avoid fire or smoke damage, remove any flammable
materials from storage drawer. Items like plastic
containers and paper manuals can melt or burn.

• A small amount of smoke is normal when cleaning.

Excess smoke may indicate a faulty gasket or too
much food residue has been left in oven. Move birds
and small animals susceptible to fumes or smoke to
another room.

• Oven should be cleaned before it gets too dirty. Wipe

up large spills before self-cleaning.

• Do not use cleaning cycle if oven light cover is not

properly in place.

• Remove oven racks and all cooking utensils from oven.
• Clean excess spills from oven interior.
• Remove items from range top and backguard. These

areas can become hot during self-cleaning cycle.

Self-clean feature uses high oven temperature to clean
oven interior.
1.

Prepare oven for self-cleaning.
• Verify CONVECTION/STANDARD switch towards

STANDARD and switch is not glowing.

2.

Press CLEAN pad.

3.

Press 

 or 

 pad to adjust cleaning time.

• “3:00” displays when  

 or 

 is pressed.

• Increase or decrease cleaning time by 5 minute

increments.

• Clean can be set from 2 to 4 hours. Minimum

recommended cleaning time is 3 hours.

• Oven begins to clean at calculated time. “LOCK”

flashes in display when automatic door latch is
locking.

4.

Press OVEN CANCEL  pad when finished.
• When oven has cooled to a safe temperature, door

latch opens and “LOCK” light flashes while opening.
When oven has cooled enough to open door
“LOCK” light no longer displays and door can be
opened.

Interrupt Self-Clean Cycle
1.

Press OVEN CANCEL pad.

2.

When oven has cooled to a safe temperature, door
will unlock and can be opened.

Self-clean feature uses high oven temperature to clean
oven interior. Set oven to begin and end cleaning at later
time using. Range control calculates back from end time
to determine starting time.
1.

Prepare oven for self-cleaning.
• Verify CONVECTION/STANDARD switch towards

STANDARD and switch is not glowing.

2.

Press CLEAN pad.

3.

Press 

 or 

 pad until desired amount of cleaning

time is displayed.
• “3:00” displays when  

 or 

 is pressed.

• Increase or decrease cleaning time in 5 minute

increments.

• Clean can be set from 2 to 4 hours. Minimum

recommended cleaning time is 3 hours.

4.

Press STOP TIME pad.

5.

Press 

 or 

 pad until desired stopping time

appears in  display.
• Starting time is automatically calculated based on

amount of cleaning time and stop time.

• “LOCK” flashes in display when automatic door

latch is locking.

• To view remaining cleaning time, press and hold

CLEAN pad.

• To view calculated stop time, press and hold STOP

TIME pad.

6.

Press OVEN CANCEL pad when finished.
• When oven has cooled to a safe temperature, door

latch opens and “LOCK” light flashes. When oven
has cooled enough to open door “LOCK” light no
longer displays and door can be opened.

Interrupt Self-Clean Cycle
1.

Press OVEN CANCEL pad.

2.

When oven has cooled to a safe temperature, door
will unlock and can be opened.