Lowrance electronic X515C DF Benutzerhandbuch
27
Power Diagram A
Use this method if you are powering the display unit and or the dis-
play unit and a NMEA 2000 network. (Fuses may be different from
those shown.).
The network and any NMEA 2000 devices will not operate unless
the NMEA 2000 Power Cable is connected to power. (However,
the NMEA 2000 Power Cable is connected to power. (However,
never connect multiple power sources to a NMEA 2000 network.
If you have a network that is already powered, see diagram B on page
28.)
The method in diagram B is also used when your display unit is con-
nected to a NMEA 2000 network that is already connected to power.
If you have a network that is already powered, see diagram B on page
28.)
The method in diagram B is also used when your display unit is con-
nected to a NMEA 2000 network that is already connected to power.
(Never connect multiple power sources to a NMEA 2000 network.)
Shield
Mandatory
network
power-off
switch
network
power-off
switch
Black
Black
Red
Recommended
display unit
power-off switch
display unit
power-off switch
To unit
12 volt DC
power source
Data Cable
NMEA 2000
Power Cable
Power Cable
3-amp fuse
3-amp fuse
Display Unit
Power Cable
Power Cable
White
(unused)
(unused)