Lowrance electronic X515C DF Benutzerhandbuch

when not in use. Failure to connect to and use a power
switch will drain your boat battery, which could stop
your boat's operation.

Connecting to a NMEA 2000 Network

Your unit can be connected to a NMEA 2000 bus, receiving sensor in-

formation from units and devices attached to the network. Contact LEI

Extras (look inside back cover for accessory ordering information) for

NMEA 2000 accessories.

NMEA 0183 Cable Connections

NMEA is a standard communications format for marine electronic

equipment, mainly navigation equipment. Your sonar unit cannot cur-

rently communicate with the NMEA 0183 format, so the Data cable

wires will not be used.

Mounting the Unit: Bracket, In-Dash or Portable

You can install the sonar unit on the top of a dash with the supplied

gimbal bracket. It can also be installed in the dash or mounted on a

portable power supply. If you use the supplied bracket, you may be in-
terested in the optional R-A-M

bracket mounting system. This con-

verts the unit's gimbal bracket to a swivel mount, which can be used on

the dash or overhead mounting positions. Installation instructions are

supplied with the R-A-M mounting kits.

Optional R-A-M mounting system.

Bracket Installation
Mount the unit in any convenient location, provided there is clearance

behind the unit when it's tilted for the best viewing angle. You should

also make sure there is enough room behind the unit to attach the