Lowrance electronic X515C DF Benutzerhandbuch

30 

power and transducer cables. (A drawing on the next page shows the 

dimensions of a gimbal-mounted sonar unit.) 
Holes in the bracket's base allow wood screw or through-bolt mounting. 

You may need to place a piece of plywood on the back side of thin fiber-

glass panels to reinforce the panel and secure the mounting hardware. 

 

Drill a 1-inch (25.4 mm) hole in the dash for the power and transducer 

cables. The best location for this hole is immediately under the gimbal 

bracket location. This way, the bracket can be installed so that it covers 

the hole, holds the cables in position and results in a neat installation. 

Some customers, however, prefer to mount the bracket to the side of 

the cable hole — it's a matter of personal preference.