Combi 8100 Benutzerhandbuch

Loosen lower anchor belt by depressing belt
adjuster slide button and pulling out lower
anchor belt.

- Pressing down in center of car seat to reduce 

tension on lower anchor belt will make it 
easier to loosen lower anchor belt.

Remove hook-on connectors from vehicle 
anchors.

- Press and hold the connector retainer spring    .

- Push connector in, then rotate connector    , 

and pull out     to unhook from the vehicle 
anchor (fig. j). If the connector can’t be 
rotated, push in and lift the connector to 
unhook from the vehicle anchor.

- Repeat to remove hook-on connector on 

opposite side.

1

2

3

2

1

3

When not using the LATCH System, store the 
lower anchor belt and hook-on connectors by
snapping the connectors onto LATCH
connector storage rings located on the 
back side of the seat pad (fig. k). 
Pull on free end of lower anchor 
belt to tighten.

NOTE: To prevent damage to the seat 

pad, care should be taken when 
removing or securing connectors.
Excessive force could damage 
or tear seat pad.