Combi 8100 Benutzerhandbuch

Check for secure installation. Gripping car seat 
at top of armrest, pull car seat front to back and 
left to right to check for secure installation (fig. h). 
Vehicle lap belt MUST stay tight.

- If the vehicle lap belt does not stay tight

or car seat can not be securely installed, 
see vehicle owner’s manual, “Vehicle Seat 
Belts” section or move to a different seating
location.

Recheck recline of car seat. Adjust if necessary 
(see step 11).

Unbuckle vehicle seat belt.

- Pressing down in center of car seat to reduce 

tension on vehicle seat belt will make it easier 
to loosen vehicle seat belt.

Open belt lock-off and remove vehicle seat belt 
from belt path.

Tighten vehicle seat belt to secure the 
car seat. 

- Press down in center of car seat 

to depress the vehicle cushion while 
tightening vehicle seat belt (fig. e).

Close belt lock-off over lap or lap and
shoulder belt (fig. f).

To close:

- Push down lock-off cover    .
- Then push down locking tab    .

Check recline of car seat. Line inside 
level indicator MUST be in green striped 
zone (fig. b). If line is not in green 
striped zone, adjust recline position or 
place tightly rolled up towel, blanket or 
firm foam (pool noodle) under end of 
car seat contacting vehicle seat back (fig. g). 

If car seat can not be adjusted to locate 
the line in the green striped zone:

1. Try a different seating position.
2. Do not use this car seat.

NOTE: Vehicle must be parked on 

horizontal surface and child in 
car seat when checking angle 
of car seat.

2

1

1

2