Dimplex Electric Fireplace Benutzerhandbuch
MAINTENANCE
Light Bulb Replacement:
Light bulbs need to be replaced when you notice a
dark section of the flame. There are four
bulbs under the log set which generate the flames
and embers.
Tool Requirements: Slot Screw Driver
Bulb Requirements: Quantity of 4 clear
chandelier or candelabra bulbs with an E-12
(small) socket base, 60 watt rating. Example: GE
60BC or Philips 60CTC.
Helpful Hints
It is a good idea to replace all light bulbs at one
time if they are close to the end of their rated life.
Group replacement will reduce the number of
times you need to open the unit to replace light
bulbs. Long life bulbs are recommended to reduce
the frequency of bulb changes.
time if they are close to the end of their rated life.
Group replacement will reduce the number of
times you need to open the unit to replace light
bulbs. Long life bulbs are recommended to reduce
the frequency of bulb changes.
CAUTION
•
•
•
Do not exceed 60 watts per bulb.
When handling log only apply force to the
ember bed section not directly to the logs.
ember bed section not directly to the logs.
NOTE
•
Allow at least 5 minutes for light bulbs to
cool off before touching bulbs to avoid
accidental burning of skin.
cool off before touching bulbs to avoid
accidental burning of skin.
WARNING
•
Disconnect all power coming to fireplace
at main service panel before attempting
any maintenance or cleaning to reduce risk
of fire, electric shock or damage to
persons
at main service panel before attempting
any maintenance or cleaning to reduce risk
of fire, electric shock or damage to
persons
5