Quantum DLT-S4 Betriebsanweisung
Chapter 13 Using the Tape Drive
Cleaning the Tape Drive
DLT-S4 Product Manual
120
Cleaning Cartridge Life
Expectancy
Expectancy
13
Each cleaning cartridge is good for 20 uses. Use one of the labels that is
supplied with the cleaning cartridge to track the number of uses and
discard the cleaning cartridge after the final use.
Cleaning Cartridge
Compatibility
Compatibility
13
The SDLT CleaningTape is compatible with SDLT 220, SDLT 320,
SDLT 600, and DLT-S4 tape drives.
Cleaning Instructions
13
To clean the tape drive, follow these steps:
1
Insert a cleaning cartridge into the tape drive.
The middle (green) LED flashes and the cleaning cycle begins
The middle (green) LED flashes and the cleaning cycle begins
automatically. Based upon previous cleaning cartridge usage, the
cleaning operation may last up to 10 minutes.
When the cleaning cycle completes, the tape drive automatically
When the cleaning cycle completes, the tape drive automatically
ejects the cleaning cartridge; turns off the right LED; and steadily
illuminates the middle LED.
2
Remove the cleaning cartridge, place it back in its plastic case, and
mark the label after each cleaning.
Note:
To use the cleaning cartridge in an autoloader or library tape
drive, see the autoloader or library owner’s documentation.
Note:
On the last (20th) cleaning, the tape drive does not eject the
cleaning cartridge. Press the
Eject
button on the front of the
tape drive to eject the expired cleaning cartridge. Dispose
of the expired cleaning cartridge.