Quantum LTO-2 Installationsanweisungen
3
Manually Removing an LTO Cartridge
Figure 2. Worm Gear
3.
Continue turning the worm gear until the cartridge is sticking out of the unit approximately 17 mm
(0.66”). Then carefully pull the cartridge out by hand.
4.
After you have removed the cartridge, put the top cover back on the drive; then replace and tighten the
screws.
5.
Return the drive to Certance.
CAUTION: Do NOT use the drive after you have removed a cartridge. The drive must be returned to
Certance for servicing.
Certance for servicing.
If you have any questions about this procedure, contact Technical Support.