Champion pp-3 Benutzerhandbuch
C O N T R O L P A N E L S
Drain State
When the timer t expires, the controller will change from the RUN STATE to the DRAIN
STATE.
STATE.
¾ Display shows drn
¾ Change Water indicator light flashes
¾ Heater is enabled
¾ Heater is enabled
¾ Pumps are OFF
¾ Soap Pump is disabled
¾ Soap Pump is disabled
The activation of alarm a l . 1 will automatically place the controller into the FILL STATE.
The FILL STATE can also be entered by pressing and holding the UP and START/STOP
buttons in for 15 seconds.
Stop State
If an operator presses the START/STOP button while in the RUN STATE, the controller
will change to the STOP STATE.
will change to the STOP STATE.
¾ Display shows the water temperature
¾ Change Water indicator light if OFF
¾ Heater is enabled
¾ Heater is enabled
¾ Pumps are OFF
¾ Soap Pump is enabled
¾ Soap Pump is enabled
¾ Timer t is paused
¾ Timers t2 and t3 do not pause
¾ Timers t2 and t3 do not pause
The controller will return to the RUN STATE if the operator presses the START/STOP
button.
The activation of alarm a l . 1 will automatically place the controller into the FILL STATE.
AL2 State
While in the RUN STATE or STOP STATE, the controller will enter the AL2 STATE if
the water temperature sensor enters into an alarm condition.
the water temperature sensor enters into an alarm condition.
¾ Display shows a l . 2
¾ Alarm indicator light is ON
¾ Alarm indicator light is ON
¾ Heater is disabled
¾ Pumps are OFF
¾ Pumps are OFF
¾ Timer is paused
¾ Timers t2 and t3 do not pause
¾ Timers t2 and t3 do not pause
24