Enterasys csx200 Betriebsanweisung
CSX200 Family User’s Guide
135
7
WAN Configuration Using Local
Management
Management
This chapter provides detailed instructions for configuring your CSX200 Wide Area Network
(WAN) interface.
(WAN) interface.
Chapter Organization
The following list describes the organization of this chapter. Proceed to the section listed below
based upon the WPIM that you have installed in your CSX200.
based upon the WPIM that you have installed in your CSX200.
•
•
•
•
•
•
•
•
NOTE
The WAN Interface must be configured and the device reset before configuring router
information into local management.
information into local management.
NOTE
The CSX200 has the flexibility to use a variety of WPIMs, with the exception of the
WPIM-S/T. This chapter shows how to configure the CSX200 and the CSX200 family
of products for the WPIM-T1, WPIM-SY, WPIM-DDS, and WPIM-HDSL through Local
Management.
WPIM-S/T. This chapter shows how to configure the CSX200 and the CSX200 family
of products for the WPIM-T1, WPIM-SY, WPIM-DDS, and WPIM-HDSL through Local
Management.
Information for configuring the WPIM-DI and WPIM-E1 through Local Management is
not included in this chapter, but is available through their respective WPIM Local
Management guides.
not included in this chapter, but is available through their respective WPIM Local
Management guides.