Enterasys csx200 Betriebsanweisung
WAN Configuration Using Local Management
140
CSX200 Family User’s Guide
T1 Interface Configuration
This section describes the features of the WAN Interface Configuration screen. Access the screen
by using the arrow keys to highlight the WAN Int Config option at the bottom of the WAN
Physical Configuration screen, pressing ENTER. The WAN Interface Configuration screen shown
in
by using the arrow keys to highlight the WAN Int Config option at the bottom of the WAN
Physical Configuration screen, pressing ENTER. The WAN Interface Configuration screen shown
in
displays.
Figure 67
T1 WAN Interface Configuration Screen
T1 WAN Interface Configuration Screen Fields
This section describes the WAN Interface Configuration screen fields.
Interface Number —
Displays the active Interface Numbers. Use this field to configure the
Interface Numbers you assigned to the Time Slots on the WAN Physical Configuration screen.
Max Xmit Unit —
User-configured field that displays the maximum packet size that can be
transmitted on the selected interface. The default settings for this field are 8191 for PPP and 4095
for Frame Relay.
for Frame Relay.
Line Coding —
Displays the Line Coding for Time Slots associated with this interface. This field
displays JBZS, INV-HDLC, or None. The default setting for this field is None.
WAN INTERFACE CONFIGURATION
RETURN
SAVE
Interface Number: [002]
Max Xmit Unit: [0]
Line Coding: [NONE]
Active Protocol: [NONE]
Max Xmit Unit: [0]
Line Coding: [NONE]
Active Protocol: [NONE]
148204
CSX200 Local Management
Flash Image Version: xx.xx.xx
001
002
002
PT# IF# LID
STATE
PT# IF# LID STATE
001 Enet
UP