ZyXEL nbg-4615 Betriebsanweisung

Chapter 14 Wireless LAN

NBG4615 User’s Guide

Select WPA-PSK or WPA2-PSK from the Security Mode list.

Figure 78   Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK

The following table describes the labels in this screen.

Hex

Select this option in order to enter hexadecimal characters as a WEP key. 

The preceding "0x", that identifies a hexadecimal key, is entered 
automatically.

Key 1 to Key 4 The WEP keys are used to encrypt data. Both the NBG4615 and the 

wireless stations must use the same WEP key for data transmission.

If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 
hexadecimal characters ("0-9", "A-F").

If you chose 128-bit WEP, then enter 13 ASCII characters or 26 
hexadecimal characters ("0-9", "A-F"). 

You must configure at least one key, only one key can be activated at 
any one time. The default key is key 1.

Apply

Click Apply to save your changes back to the NBG4615.

Cancel

Click Cancel to reload the previous configuration for this screen.

Table 44   Network > Wireless LAN > Security: Static WEP (continued)

Table 45   Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK

SSID

Select the SSID for which you want to configure the security.

Security Mode

Select WPA-PSK or WPA2-PSK to enable data encryption.

WPA 
Compatible

This field appears when you choose WPA2-PSK as the Security Mode.

Check this field to allow wireless devices using WPA-PSK security 
mode to connect to your NBG4615.