LXE mx7 Verweisanleitung

330 

LXE Scanner Wedge 

MX7 Reference Guide 

 

E-EQ-MX7RG-H 

Factory Default Settings 

Main 
Port 1 

Internal 

Port 2 

Disabled 

Port 3 

Disabled 

Send key messages (WEDGE) 

Enabled 

Enable Internal Scanner Sound 

Enabled 

Good Scan Vibration 

Disabled / Long 

Bad Scan Vibration 

Disabled / Long 

Adjust the settings and tap the OK box to save the changes. The changes take effect immediately. 

Port  

Port 1 – Internal. Radio button allows scanner input/output on Port 1 
(scan key or trigger). 

Port 2 – Output is enabled when COM1 is enabled on this port. 

Port 3 - Output is enabled when COM1 is enabled on this port. 

Send Key 
Messages 
(WEDGE) 

The default setting is Enabled. This feature coexists with the 
Prefix/Suffix feature and the Advanced Control Character Mapping 
feature. Enable for Key Message mode, disable for Block Mode. Enable 
to use Advanced Control Character Mapping. 

Enable Internal 
Scanner Sound 

The default is Enabled. Functionality of the internal scanner driver 
engine includes audible tones on good scan (at the maximum db 
supported by the speaker) and failed scan. If enabled, Good Scan / Bad 
Scan Vibration provides a tactile response on a scan event. 

Disable this parameter when good scan/bad scan sounds are to be 
handled by alternate means e.g. application-controlled sound files. 

Good Scan / Bad 
Scan Vibration 

The default setting is Disabled. Enable this parameter when a tactile 
response on a good scan, bad scan or both event is desired. Scan sounds 
are accompanied by a tactile response when the internal scanner Sound 
parameter is enabled.  

Enable short, medium or long duration for each selection (good scan/bad 
scan).