LXE mx7 Verweisanleitung

MX7 Multi-Charger (Optional) 

65 

E-EQ-MX7RG-H 

 

MX7 Reference Guide 

The multi-charger requires an external power source before battery pack charging / analyzing can 
commence. The battery pack begins to recharge as soon as it is placed in the battery well. There 
are five Charging wells. The well closest to the overlay can be used to analyze the main battery 
pack in the well.  

 

Pressing the dome switch within three minutes begins the Analyze – Discharge – Charge cycle on 
the battery pack in the Charge/Analyze well.  

The external AC power supply cable connection for the Multi-charger is shipped with the multi-
charger. 

The main battery pack can be charged in either 1) a powered MX7 Multi-Charger or 2) by a 
powered AC Adapter connected by multipurpose cables to the mobile device. 

Insert the main battery into any charging well in the Multi-Charger. The retaining clip on the 
battery pack snaps the battery into place in the battery well. Remove the battery pack by 
depressing the retaining clip and pulling the battery straight up and out. 

Do not “slam” or drop the battery into the charging well. Do not allow foreign material to fall or 
spill into the charging well. Failure to follow these instructions can result in damage to the main 
battery pack or the Multi-Charger. 

 

Please refer to the “MX7 Multi-Charger User’s Guide” for instruction.