LXE mx7 Verweisanleitung
MX7 Cradles (Optional)
67
E-EQ-MX7RG-H
MX7 Reference Guide
MX7 Cradles (Optional)
MX7 docking cradles restrain the MX7, re-charge batteries, and enable serial, audio or USB
communication with a PC, scanner, printer or other peripheral device. MX7 keypad data entries
can be mixed with cradle-tethered scanner barcode data entries while the MX7 is in a powered
cradle. Bluetooth device connection and use, while the MX7 is docked, are managed by the MX7
Control Panel Bluetooth program, not the cradle.
communication with a PC, scanner, printer or other peripheral device. MX7 keypad data entries
can be mixed with cradle-tethered scanner barcode data entries while the MX7 is in a powered
cradle. Bluetooth device connection and use, while the MX7 is docked, are managed by the MX7
Control Panel Bluetooth program, not the cradle.
Using a wall AC adapter the desktop cradle can also recharge a spare MX7 battery in
approximately 4 hours. The MX7 battery recharging is managed by the docked MX7 power
management configuration. The MX7 can be either On or in Suspend Mode while in the cradles.
The MX7 Vehicle Mount cradles do not have spare battery charging capabilities. Special purpose
and power cables are available from LXE®.
approximately 4 hours. The MX7 battery recharging is managed by the docked MX7 power
management configuration. The MX7 can be either On or in Suspend Mode while in the cradles.
The MX7 Vehicle Mount cradles do not have spare battery charging capabilities. Special purpose
and power cables are available from LXE®.
Wireless host/client communications can occur whether the cradles are receiving external power
or not as wireless functions draw power from the main battery in the MX7.
or not as wireless functions draw power from the main battery in the MX7.
The cradles are designed to secure an MX7 with or without a protective boot
(MX7A490PROTBOOTBLK or MX7A491PROTBOOTYEL)
, a handstrap and/or a trigger
handle.
The MX7 Desktop Cradle
requires external power before battery charging and tethered scanning
can commence. The cradle can charge both the main battery in the docked MX7 and a spare main
battery at the same time.
battery at the same time.
The Powered Vehicle Cradle
requires an external power source before docked MX7 battery
charging and tethered scanning can commence.
The Passive Vehicle Cradle
does not have connectors that can accept an external power source or
tethered scanner. It is designed to secure the MX7 in a vehicle.
Please refer to the MX7 Cradle Reference Guide for installation, technical
specifications and user instruction.
specifications and user instruction.