3com S7906E Verweisanleitung
1-31
To make the configured forwarding mode take effect, you need to save the configuration and restart the
switch.
Examples
# Configure the traffic forwarding mode of the SRPU (LSQ1MPUA) as the enhanced Layer 2 forwarding
mode.
<Sysname> system-view
[Sysname] switch-mode l2-enhanced
# Restore the default traffic forwarding mode of the SRPU.
<Sysname> system-view
[Sysname] undo switch-mode
switch-mode (for LPU)
Syntax
switch-mode
{
bridging
|
routing
}
slot
slot-num
undo switch-mode
slot
slot-num
View
System view
Default Level
2: System level
Parameters
bridging: Indicates the MAC extension mode.
routing: Indicates the route extension mode.
slot-num: Number of the slot where the LPU resides.
Description
Use the switch-mode command to configure the working mode of an EA LPU.
Use the undo switch-mode command to restore the default working mode of the EA LPU.
By default, the working mode of an EA LPU is determined by the SRPU model and the current traffic
forwarding mode of the SRPU. Refer to
for details.
Table 1-10 Default working mode of EA LPUs
nSRPU model
Current traffic forwarding
mode of the SRPU
Default working mode of EA
LPUs
LSQ1SRP2XB, LSQ1SRPB,
LSQ1MPUA
LSQ1MPUA
l2-enhanced or standard
routing