3com S7906E Guide De Référence

 

1-31 

To make the configured forwarding mode take effect, you need to save the configuration and restart the 

switch.  

 

# Configure the traffic forwarding mode of the SRPU (LSQ1MPUA) as the enhanced Layer 2 forwarding 

mode. 

<Sysname> system-view 

[Sysname] switch-mode l2-enhanced 

# Restore the default traffic forwarding mode of the SRPU. 

<Sysname> system-view 

[Sysname] undo switch-mode 

 { 

|

 } 

 

slot-num 

 

 

 

System view 

2: System level 

bridging: Indicates the MAC extension mode. 

routing: Indicates the route extension mode. 

slot-num: Number of the slot where the LPU resides.  

Use the switch-mode command to configure the working mode of an EA LPU. 

Use the undo switch-mode command to restore the default working mode of the EA LPU. 

By default, the working mode of an EA LPU is determined by the SRPU model and the current traffic 

forwarding mode of the SRPU. Refer to

 

for details. 

Table 1-10 Default working mode of EA LPUs 

LSQ1SRP2XB, LSQ1SRPB, 
LSQ1MPUA 

l2-enhanced or standard 

routing