Heartland hcdwis Betriebsanweisung

Seite von 64
32
Direct wire method:
Power supply cord method:
7. Reconnect power or plug in dishwasher.
Check operation
1. Read the Use and Care Guide that came with your dishwasher.
2. Check that all parts have been installed and no steps were 
skipped.
3. Check that you have all the tools you used.
4. Start dishwasher and allow it to complete the shortest wash cycle. 
After the first two minutes, unlatch door, wait five seconds, then 
open door.
5. Check to see that there is water in the bottom of the dishwasher 
tub. Check that dishwasher is working properly.
6. If not, disconnect power or unplug dishwasher and see “If 
dishwasher does not operate” section.
If dishwasher does not operate
First try the solutions suggested here to possibly avoid the cost of a 
service call.
• Has the circuit breaker tripped or the house fuse blown?
• Is the door closed tightly and latched?
• Has the cycle been set correctly to start the dishwasher?
• Is the water turned on?
If none of these work, call 1-877-650-5775
3
Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector 
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in 
death, fire, or electrical shock.
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in 
death, fire, or electrical shock.
3
Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector 
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in 
death, fire, or electrical shock.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in 
death,fire, or electrical shock.