KitchenAid 48-Inch 6-Burner with Steam-Assist Oven, Dual Fuel Freestanding Range, Commercial-Style Benutzung Und Pflege
10
USING YOUR OVEN
CONTROL PANEL
The control panel houses the control menu and function
controls. The control pads are very sensitive and require
only a light touch to activate.
For more information about the individual controls, see their
For more information about the individual controls, see their
respective sections in this manual.
DISPLAY
■
When power is first
supplied to the
appliance, or when
power has been
interrupted for more
than 10 seconds,
the clock will be set
to 12:00 P.M. To set
the time, follow the
instructions under
“Clock” section. To bypass setting the clock and begin using
the oven, touch START, OFF or CLEAR.
■
On 48" (121.9 cm) ranges, the left display shows the
18" (45.7 cm) oven and the right display shows the
30" (76.2 cm) oven.
■
When the oven (s) are
in use (active mode),
the display shows
oven temperature,
heat source(s), and
timer, if set.
■
After approximately
2 minutes of inactivity,
the display will go into
standby (sleep) mode. When the oven is in operation, the
display will remain active.
■
On 30" (76.2 cm) and 36" (91.4 cm) ranges, if the range is
not in use (sleep mode), the display shows the time of the
day. To turn the clock display on/off, see “Clock” section.
■
On 48" (121.9 cm) ranges, if the range is not in use (sleep
mode) the right display shows the time of day. To turn the
clock display on/off, see “Clock” section.
■
During programming,
the display shows
menus and the
appropriate selections
for the respective
cooking function.
Touch screen to begin
PM
Enter temperature
170° - 500°F
BAKE
< Back
Temp
Cook
Time
Off
Probe:
Off
350°
Enter cooktime
BAKE
< Back
Cook Time
HR
Probe:
Off
2:30
Temp
350°
MIN
GLASS-TOUCH MENU-DRIVEN
DISPLAY
The display area functions as both a display and an interactive,
menu-driven touch control. It is designed to be easily navigable,
guiding you through the menus, offering multiple selections,
accepting your input, and executing your commands. It also
provides instructions, tips, and graphics.
The LCD touch screen is used to make menu selections, adjust
The LCD touch screen is used to make menu selections, adjust
settings, and input commands.
Menu selections and input adjustments are made in the center
portion of the screen, and the command inputs (OK, Adjust
Settings, Browning, Back, etc.) are made in the bottom portion
of the screen. Screen titles and descriptions are displayed in
the top portion of the screen, which accepts no input. A light-
to medium-pressure touch of the fingertip will activate the menu
selection.
TIMER
The Timer is set in hours and minutes and counts down the set
time. Times of more than 1 hour will count down by the minute.
In the last hour, the time will count down by minute and second.
NOTE: The Timer does not start or stop the oven.
NOTE: The Timer does not start or stop the oven.
A
B
C
1.
Touch TIMER SET.
2.
Enter desired time using +
(plus) or - (minus) keys to
adjust time or numerical
keys to enter desired time.
3.
Touch START TIMER to
begin countdown. When
time reaches 0:00, 4 chimes
will sound until TIMER OFF
is touched.
4.
To cancel Timer or stop
reminder tones, touch
TIMER OFF.
Keep Warm
Use + and - buttons or number pad to enter time
TIMER
< Back
Time
MIN
HR
00:00
Start
Timer
+
-
+
-
Use + and - buttons or number pad to enter time
TIMER
< Back
Time
MIN
HR
00:00
Start
Timer
+
-
+
-
Keep Warm