Xerox FreeFlow Accxes Indexer Support & Software Betriebsanweisung
Accxes Copy
Xerox Wide Format FreeFlow Accxes Indexer/FreeFlow Accxes Copy
User Guide
3-11
Following a short pause while the scan is transferred to Accxes Copy, a preview of the calibration image
will appear in the left preview pane of the Accxes Copy UI. Select the preview so that it is visible in the
main Accxes Copy window.
will appear in the left preview pane of the Accxes Copy UI. Select the preview so that it is visible in the
main Accxes Copy window.
•
From the Accxes Copy UI, select the Options menu.
•
In the Options menu, select 'Read Calibration Chart'. You will see a status bar appear as the
calibration is performed. The entire process may take approximately one to two minutes, or more
depending upon scan resolution and PC specification.
calibration is performed. The entire process may take approximately one to two minutes, or more
depending upon scan resolution and PC specification.
Note
As well as the color calibration, there are also color controls for further enhancement of the image.
These controls are disabled during the calibration process but are available for use together with
the calibration when making copies. Further detail of these controls is provided in the section in
this document entitled, 'Accxes Copy - Test Configuration'.
These controls are disabled during the calibration process but are available for use together with
the calibration when making copies. Further detail of these controls is provided in the section in
this document entitled, 'Accxes Copy - Test Configuration'.
•
Once the Calibration is finished, the 'Use Calibration' option should be checked. See/Check this
from the Options menu in the Accxes Copy UI and view the effect on the calibration chart.
from the Options menu in the Accxes Copy UI and view the effect on the calibration chart.
Note
If the scanned calibrated image in the Accxes Copy UI appears skewed or vastly different in
background color, a blurred image, etc. Or if the resultant copy exhibits poor quality, check the
calibration file to ensure the process has been completed successfully. In order to do this, perform
the following activities:
background color, a blurred image, etc. Or if the resultant copy exhibits poor quality, check the
calibration file to ensure the process has been completed successfully. In order to do this, perform
the following activities:
•
Leave the calibration process with the currently calibrated file in Accxes Copy unchanged.
•
On the PC hosting Accxes Copy go to Start > Run
•
Enter %temp% and select [OK].
•
In the window that opens, navigate to the following directory and locate the file called Last
Calibration End.jpg:
Calibration End.jpg:
•
Xerox FreeFlow Accxes> Xerox FreeFlow Accxes Copy > Last Calibration End.jpg
•
Double click the file in order to view the image.
•
Check that the file views as shown in the example below.