Cisco Cisco ONS 15310-CL SONET Multiservice Platform Installationsanleitung

Read the Release Notes for Cisco ONS 15310-CL Release 6.0.

Log into the node that you will upgrade. For detailed instructions, refer to the Cisco ONS 15310-CL 
Procedure Guide.

Complete the 

.

If you have multiple ONS 15310-CL nodes configured in the same IP subnet, ensure that only one is 
connected to a router. Otherwise, the remaining nodes might be unreachable. Refer to the 
Cisco ONS 15310-CL Reference Manual for LAN-connection suggestions.

When you have completed the tasks for this section, proceed with the 

.

Ensure that your workstation is either one of the following:

IBM-compatible PC with a Pentium III/700 or faster processor, CD-ROM drive, a minimum of 384 
MB RAM and 190 MB of available hard drive space, running Windows 98, Windows NT 4.0 (with 
Service Pack 6a), Windows 2000 Professional (with Service Pack 3), or Windows XP Professional 
(with Service Pack 1)

UNIX workstation with Solaris Versions 8 or 9, on an UltraSPARC or faster processor, with a 
minimum of 384 MB RAM and a minimum of 190 MB of available hard drive space

This procedure provides the critical information checks and tasks you 
must complete before beginning an upgrade.

ONS 15310-CL nodes to upgrade
PC or UNIX workstation
Cisco ONS 15310-CL Release 6.0 software

Prerequisite Procedures None

Required

Onsite or remote

Superuser

This task verifies all PC or UNIX workstation hardware and software 
requirements. Before upgrading the workstation to run CTC Software 
R6.0, complete this task.

PC or UNIX workstation

Prerequisite Procedures None

Required

Onsite or remote (but in the presence of the workstation)

Superuser